Overview

BH-COV080 is a dual – VCG channel Gigabit Ethernet Converter, provides 4 gigabit Ethernet interfaces (3 copper and 1 fiber Ethernet interfaces) compliant with IEEE 802.3 series standard and 2 STM-1 optical interfaces, supports 1+1 optical path protection and 2+0 mode. In 1+1 mode, the 4 Etherent interfaces share one VCG and the bandwidth is one VC4 (139Mb/s). In 2+0 mode, the 4 Ethernet interfaces share two VCG channels and the bandwidth is two VC4. Therefore, By GFP and EoS technology, BH-COV080 can realize two 139Mb/s Ethernet traffic transmission over STM-1 optial line.

Feature

· Compact design with 1U height, 19 inch, 155mm depth, and can be installed on standard rack

· Optical interface

· Two STM-1 optical interfaces; SFP optical module (LC interface); Hot pluggable

· The line bit rate is 155Mb/s, single mode, ltransmission distance is optional (depend on the SFP optical module)

· Supports real-time detection for the status of optical module

· Supports Automatic Laser Shutdown(ALS) to protect operators from hurt

· Supports Remote Power down Detect (RPD) function

· Ethernet interface

· One fiber gigabit Ethernet interface and three copper gigabit Ethernet interfaces compliant with IEEE802.3 serial standard;

· The copper gigabit Ethernet interfaces adopt RJ45 connector, support auto-negotiation, which can work in 1000M full-duplex, 100M full/half-duplex, 10M full/half-duplex mode; supports auto MDI/MDX function

· The fiber gigabit Ethernet interface adopts 1.25G SFP module, which can work in 1000M full-duplex mode, transmission distance is optional (depend on the SFP optical module)

· Provides two WAN port (inside and invisible), each corresponding to one VCG separately, the bandwidth of each VCG is a VC4.

· Management Interface

· Any of the GE1-3, GX4 can be used as the Ethernet management interface (EMU)

· Provides one serieral management interface (CONSOLE)

· Supports embedded DCN management channel to achieve inband management

· Ethernet Switch bridge

· Supports unicast, multicast and broadcast frame

· Supports 802.3x flow control and broadcast storm filtering control*

· 8K MAC address table, with optional 12s / 300s ageing time configurable, the default is 300s

· Supports MAC address dynamic learning function

· Supports 256 items static MAC address configuration

· Accepts frames with length between 64 and 1552/2048 bytes (otherwise filtering)

· Supports port-based VLAN and IEEE802.1Q tag-based VLAN

· Supports QinQ(Double Tag VLAN)

· Supports up to 4K items VLAN table

· Supports Link Aggregation for WAN and LAN port, supports up to 4 link aggregation groups

· Supports IEEE 802.1P QoS

· Supports Port Mirroring

· Supports Dynamic ARL Table Learning and Searching

· Supports port rate control

· Provides performance statistic for each Ethernet interface;

· Loop back

· Supports VC4 channel of STM-1 optical loopback towards line side

· Supports 1+1 path protection and Automatic Protect Switch (APS) with switching time less than 50ms

· Supports 2+0 mode, the transmission bandwidth available can be up to 2 VC4

· Compliant to ITU-T standards

· GFP-F encapsulation , compatible with ITU-T G.7041 recommendation

· NE Management

· Supports Simple Network Management Protocol (SNMP), compatible with V1 and V2C protocol

· Supports FTP protocol and firmware download online without disturbance of existing traffic

· Monitoring the alarms and status in real-time

· Supports hot-spare power, the power consumption is less than 10W

· -48V DC single power access

· 220V AC single power access

· -48V DC+220V AC double power access

*Note:

The ingress port mirroring function can be available Only when both the broadcast strom filtering function and ingress port rate control function are closed..

Application

BH-COV080 supports point-to-point application. In 1+1 mode, the 4 Etherent interfaces share one VCG and the bandwidth is one VC4 (139Mb/s). In 2+0 mode, the 4 Ethernet interfaces share two VCG channels and the bandwidth is two VC4. Refer to section 5.3 for more.